| 1 | Chemical engineering | NOC:Engineering
Thermodynamics | System and its
Surroundings | UG/PG | 30-04-2025Wednesday | Time | 08:00:00 - 09:00:54 || |
| 2 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 5 | UG/PG | 30-04-2025Wednesday | Time | 09:00:54 - 09:43:51 || |
| 3 | Chemical engineering | NOC:Heat transfer | Lecture 5:
Resistances in
Composite Wall Case | UG/PG | 30-04-2025Wednesday | Time | 09:43:51 - 10:04:05 || |
| 4 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 05: Crystal
planes and
directions: Indexing | UG/PG | 30-04-2025Wednesday | Time | 10:04:05 - 11:05:28 || |
| 5 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Iterative Method | UG/PG | 30-04-2025Wednesday | Time | 11:05:28 - 11:23:25 || |
| 6 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Direct Method | UG/PG | 30-04-2025Wednesday | Time | 11:23:25 - 11:33:51 || |
| 7 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Sequential Method | UG/PG | 30-04-2025Wednesday | Time | 11:33:51 - 11:49:48 || |
| 8 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Phsical
interpretation of
dimensionless groups
completed | UG/PG | 30-04-2025Wednesday | Time | 11:49:48 - 12:18:46 || |
| 9 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis:
correlations for
dimentionless groups | UG/PG | 30-04-2025Wednesday | Time | 12:18:46 - 12:51:28 || |
| 10 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Modeling | UG/PG | 30-04-2025Wednesday | Time | 12:51:28 - 13:19:19 || |
| 11 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Control Structures | UG/PG | 30-04-2025Wednesday | Time | 13:19:19 - 13:40:02 || |
| 12 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Process Modelling | UG/PG | 30-04-2025Wednesday | Time | 13:40:02 - 14:08:54 || |
| 13 | Chemical engineering | Chemical Reaction
Engineering II | Distribution of
residence time | UG/PG | 30-04-2025Wednesday | Time | 14:08:54 - 15:01:57 || |
| 14 | Chemical engineering | Chemical Reaction
Engineering II | Measurement of
residence time
distribution | UG/PG | 30-04-2025Wednesday | Time | 15:01:57 - 16:00:00 || |
| 15 | Chemical engineering | NOC:Engineering
Thermodynamics | Thermodynamics and
its Applications | UG/PG | 30-04-2025Wednesday | Time | 16:00:00 - 16:42:48 || |
| 16 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3A | UG/PG | 30-04-2025Wednesday | Time | 16:42:48 - 16:54:08 || |
| 17 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4 | UG/PG | 30-04-2025Wednesday | Time | 16:54:08 - 17:13:30 || |
| 18 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4A | UG/PG | 30-04-2025Wednesday | Time | 17:13:30 - 17:43:50 || |
| 19 | Chemical engineering | NOC:Heat transfer | Lecture 3: Energy
Balance | UG/PG | 30-04-2025Wednesday | Time | 17:43:50 - 18:11:48 || |
| 20 | Chemical engineering | NOC:Heat transfer | Lecture 4: 1D
Steadystate
Conduction -
Resistance Concept | UG/PG | 30-04-2025Wednesday | Time | 18:11:48 - 18:35:49 || |
| 21 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 03: Crystal
systems and
structures: Lattice | UG/PG | 30-04-2025Wednesday | Time | 18:35:49 - 19:10:05 || |
| 22 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 04: X-ray
diffraction: Crystal
structure
determination | UG/PG | 30-04-2025Wednesday | Time | 19:10:05 - 19:41:01 || |
| 23 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Binary Numbers:
Introduction | UG/PG | 30-04-2025Wednesday | Time | 19:41:01 - 19:46:17 || |
| 24 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point: Real
numbers in decimal
system | UG/PG | 30-04-2025Wednesday | Time | 19:46:17 - 20:05:37 || |
| 25 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point in
Binary system | UG/PG | 30-04-2025Wednesday | Time | 20:05:37 - 20:13:58 || |
| 26 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Scalling
up of an impeller | UG/PG | 30-04-2025Wednesday | Time | 20:13:58 - 20:42:20 || |
| 27 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Convection
and diffusion | UG/PG | 30-04-2025Wednesday | Time | 20:42:20 - 21:10:15 || |
| 28 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introductory
Concepts | UG/PG | 30-04-2025Wednesday | Time | 21:10:15 - 21:35:03 || |
| 29 | Chemical engineering | Chemical Reaction
Engineering II | Fluid-solid
non-catalytic
reactions I | UG/PG | 30-04-2025Wednesday | Time | 21:35:03 - 22:30:44 || |
| 30 | Chemical engineering | Chemical Reaction
Engineering II | Packed bed reactor
design:external mass
transfer limitations | UG/PG | 30-04-2025Wednesday | Time | 22:30:44 - 22:59:33 || |
| 31 | Chemical engineering | Chemical Reaction
Engineering II | Fluid-solid
non-catalytic
reactions III | UG/PG | 30-04-2025Wednesday | Time | 22:59:33 - 00:00:00 || |
| 32 | Chemical engineering | NOC:Engineering
Thermodynamics | Gas-Vapor Mixture
and Air Conditioning
2 | UG/PG | 30-04-2025Wednesday | Time | 00:00:00 - 00:58:05 (2025-05-01) || |
| 33 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2 | UG/PG | 30-04-2025Wednesday | Time | 00:58:05 - 01:31:09 (2025-05-01) || |
| 34 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2A | UG/PG | 30-04-2025Wednesday | Time | 01:31:09 - 01:44:05 (2025-05-01) || |
| 35 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3 | UG/PG | 30-04-2025Wednesday | Time | 01:44:05 - 02:19:55 (2025-05-01) || |
| 36 | Chemical engineering | NOC:Heat transfer | Lecture 1:
Introduction | UG/PG | 30-04-2025Wednesday | Time | 02:19:55 - 02:43:23 (2025-05-01) || |
| 37 | Chemical engineering | NOC:Heat transfer | Lecture 2:
Introduction to
Conduction | UG/PG | 30-04-2025Wednesday | Time | 02:43:23 - 03:09:07 (2025-05-01) || |
| 38 | Chemical engineering | NOC:Heat transfer | Lecture 2:
Introduction to
Conduction | UG/PG | 30-04-2025Wednesday | Time | 03:09:07 - 03:34:51 (2025-05-01) || |
| 39 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 01:
Introduction | UG/PG | 30-04-2025Wednesday | Time | 03:34:51 - 04:15:41 (2025-05-01) || |
| 40 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 02: Atomic
structure and
bonding | UG/PG | 30-04-2025Wednesday | Time | 04:15:41 - 04:49:49 (2025-05-01) || |
| 41 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Errors and
Approximations | UG/PG | 30-04-2025Wednesday | Time | 04:49:49 - 04:58:55 (2025-05-01) || |
| 42 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Course Plan | UG/PG | 30-04-2025Wednesday | Time | 04:58:55 - 05:04:19 (2025-05-01) || |
| 43 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Truncation and
Round-Off Errors | UG/PG | 30-04-2025Wednesday | Time | 05:04:19 - 05:13:39 (2025-05-01) || |
| 44 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Tutorial: Excel | UG/PG | 30-04-2025Wednesday | Time | 05:13:39 - 05:30:21 (2025-05-01) || |
| 45 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Power of
an impeller | UG/PG | 30-04-2025Wednesday | Time | 05:30:21 - 05:58:46 (2025-05-01) || |
| 46 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction | UG/PG | 30-04-2025Wednesday | Time | 05:58:46 - 06:30:59 (2025-05-01) || |
| 47 | Chemical engineering | Chemical Reaction
Engineering II | Fluid-solid
non-catalytic
reactions I | UG/PG | 30-04-2025Wednesday | Time | 06:30:59 - 07:26:40 (2025-05-01) || |
| 48 | Chemical engineering | Chemical Reaction
Engineering II | Packed bed reactor
design:external mass
transfer limitations | UG/PG | 30-04-2025Wednesday | Time | 07:26:40 - 08:00:00 (2025-05-01) || |
| 49 | Chemical engineering | NOC:Engineering
Thermodynamics | Thermodynamics and
its Applications | UG/PG | 01-05-2025Thursday | Time | 08:00:00 - 08:42:48 || |
| 50 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1 | UG/PG | 01-05-2025Thursday | Time | 08:42:48 - 09:02:59 || |
| 51 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1A | UG/PG | 01-05-2025Thursday | Time | 09:02:59 - 09:28:08 || |
| 52 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2 | UG/PG | 01-05-2025Thursday | Time | 09:28:08 - 10:01:12 || |
| 53 | Chemical engineering | NOC:Heat transfer | Lecture 1:
Introduction | UG/PG | 01-05-2025Thursday | Time | 10:01:12 - 10:24:40 || |
| 54 | Chemical engineering | NOC:Heat transfer | Lecture 2:
Introduction to
Conduction | UG/PG | 01-05-2025Thursday | Time | 10:24:40 - 10:50:24 || |
| 55 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 01:
Introduction | UG/PG | 01-05-2025Thursday | Time | 10:50:24 - 11:31:14 || |
| 56 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction -
Computational
Techniques | UG/PG | 01-05-2025Thursday | Time | 11:31:14 - 11:48:53 || |
| 57 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 01 -
Numerical methods
for Engineers | UG/PG | 01-05-2025Thursday | Time | 11:48:53 - 11:49:54 || |
| 58 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 02 -
Numerical methods
for Engineers | UG/PG | 01-05-2025Thursday | Time | 11:49:54 - 11:50:57 || |
| 59 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Overview of Learning
Modules | UG/PG | 01-05-2025Thursday | Time | 11:50:57 - 11:59:54 || |
| 60 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Errors and
Approximations | UG/PG | 01-05-2025Thursday | Time | 11:59:54 - 12:09:00 || |
| 61 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Course Plan | UG/PG | 01-05-2025Thursday | Time | 12:09:00 - 12:14:24 || |
| 62 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Truncation and
Round-Off Errors | UG/PG | 01-05-2025Thursday | Time | 12:14:24 - 12:23:44 || |
| 63 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Why we do study
transport processes? | UG/PG | 01-05-2025Thursday | Time | 12:23:44 - 12:53:41 || |
| 64 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Transport by
convection and
diffusion | UG/PG | 01-05-2025Thursday | Time | 12:53:41 - 13:24:38 || |
| 65 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction | UG/PG | 01-05-2025Thursday | Time | 13:24:38 - 13:56:51 || |
| 66 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introductory
Concepts | UG/PG | 01-05-2025Thursday | Time | 13:56:51 - 14:21:39 || |
| 67 | Chemical engineering | Chemical Reaction
Engineering II | Introduction to
catalysts and
catalysis | UG/PG | 01-05-2025Thursday | Time | 14:21:39 - 15:08:12 || |
| 68 | Chemical engineering | Chemical Reaction
Engineering II | Steps in catalytic
reaction:
adsorption,
desorption and
reaction | UG/PG | 01-05-2025Thursday | Time | 15:08:12 - 16:00:00 || |
| 69 | Chemical engineering | NOC:Engineering
Thermodynamics | Thermodynamics and
its Applications | UG/PG | 01-05-2025Thursday | Time | 16:00:00 - 16:42:48 || |
| 70 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1 | UG/PG | 01-05-2025Thursday | Time | 16:42:48 - 17:02:59 || |
| 71 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1A | UG/PG | 01-05-2025Thursday | Time | 17:02:59 - 17:28:08 || |
| 72 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2 | UG/PG | 01-05-2025Thursday | Time | 17:28:08 - 18:01:12 || |
| 73 | Chemical engineering | NOC:Heat transfer | Lecture 1:
Introduction | UG/PG | 01-05-2025Thursday | Time | 18:01:12 - 18:24:40 || |
| 74 | Chemical engineering | NOC:Heat transfer | Lecture 2:
Introduction to
Conduction | UG/PG | 01-05-2025Thursday | Time | 18:24:40 - 18:50:24 || |
| 75 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 01:
Introduction | UG/PG | 01-05-2025Thursday | Time | 18:50:24 - 19:31:14 || |
| 76 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction -
Computational
Techniques | UG/PG | 01-05-2025Thursday | Time | 19:31:14 - 19:48:53 || |
| 77 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 01 -
Numerical methods
for Engineers | UG/PG | 01-05-2025Thursday | Time | 19:48:53 - 19:49:54 || |
| 78 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 02 -
Numerical methods
for Engineers | UG/PG | 01-05-2025Thursday | Time | 19:49:54 - 19:50:57 || |
| 79 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Overview of Learning
Modules | UG/PG | 01-05-2025Thursday | Time | 19:50:57 - 19:59:54 || |
| 80 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Errors and
Approximations | UG/PG | 01-05-2025Thursday | Time | 19:59:54 - 20:09:00 || |
| 81 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Course Plan | UG/PG | 01-05-2025Thursday | Time | 20:09:00 - 20:14:24 || |
| 82 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Truncation and
Round-Off Errors | UG/PG | 01-05-2025Thursday | Time | 20:14:24 - 20:23:44 || |
| 83 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Why we do study
transport processes? | UG/PG | 01-05-2025Thursday | Time | 20:23:44 - 20:53:41 || |
| 84 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Transport by
convection and
diffusion | UG/PG | 01-05-2025Thursday | Time | 20:53:41 - 21:24:38 || |
| 85 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction | UG/PG | 01-05-2025Thursday | Time | 21:24:38 - 21:56:51 || |
| 86 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introductory
Concepts | UG/PG | 01-05-2025Thursday | Time | 21:56:51 - 22:21:39 || |
| 87 | Chemical engineering | Chemical Reaction
Engineering II | Introduction to
catalysts and
catalysis | UG/PG | 01-05-2025Thursday | Time | 22:21:39 - 23:08:12 || |
| 88 | Chemical engineering | Chemical Reaction
Engineering II | Steps in catalytic
reaction:
adsorption,
desorption and
reaction | UG/PG | 01-05-2025Thursday | Time | 23:08:12 - 00:00:00 || |
| 89 | Chemical engineering | NOC:Engineering
Thermodynamics | Thermodynamics and
its Applications | UG/PG | 01-05-2025Thursday | Time | 00:00:00 - 00:42:48 (2025-05-02) || |
| 90 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1 | UG/PG | 01-05-2025Thursday | Time | 00:42:48 - 01:02:59 (2025-05-02) || |
| 91 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1A | UG/PG | 01-05-2025Thursday | Time | 01:02:59 - 01:28:08 (2025-05-02) || |
| 92 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2 | UG/PG | 01-05-2025Thursday | Time | 01:28:08 - 02:01:12 (2025-05-02) || |
| 93 | Chemical engineering | NOC:Heat transfer | Lecture 1:
Introduction | UG/PG | 01-05-2025Thursday | Time | 02:01:12 - 02:24:40 (2025-05-02) || |
| 94 | Chemical engineering | NOC:Heat transfer | Lecture 2:
Introduction to
Conduction | UG/PG | 01-05-2025Thursday | Time | 02:24:40 - 02:50:24 (2025-05-02) || |
| 95 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 01:
Introduction | UG/PG | 01-05-2025Thursday | Time | 02:50:24 - 03:31:14 (2025-05-02) || |
| 96 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction -
Computational
Techniques | UG/PG | 01-05-2025Thursday | Time | 03:31:14 - 03:48:53 (2025-05-02) || |
| 97 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 01 -
Numerical methods
for Engineers | UG/PG | 01-05-2025Thursday | Time | 03:48:53 - 03:49:54 (2025-05-02) || |
| 98 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 02 -
Numerical methods
for Engineers | UG/PG | 01-05-2025Thursday | Time | 03:49:54 - 03:50:57 (2025-05-02) || |
| 99 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Overview of Learning
Modules | UG/PG | 01-05-2025Thursday | Time | 03:50:57 - 03:59:54 (2025-05-02) || |
| 100 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Errors and
Approximations | UG/PG | 01-05-2025Thursday | Time | 03:59:54 - 04:09:00 (2025-05-02) || |
| 101 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Course Plan | UG/PG | 01-05-2025Thursday | Time | 04:09:00 - 04:14:24 (2025-05-02) || |
| 102 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Truncation and
Round-Off Errors | UG/PG | 01-05-2025Thursday | Time | 04:14:24 - 04:23:44 (2025-05-02) || |
| 103 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Why we do study
transport processes? | UG/PG | 01-05-2025Thursday | Time | 04:23:44 - 04:53:41 (2025-05-02) || |
| 104 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Transport by
convection and
diffusion | UG/PG | 01-05-2025Thursday | Time | 04:53:41 - 05:24:38 (2025-05-02) || |
| 105 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction | UG/PG | 01-05-2025Thursday | Time | 05:24:38 - 05:56:51 (2025-05-02) || |
| 106 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introductory
Concepts | UG/PG | 01-05-2025Thursday | Time | 05:56:51 - 06:21:39 (2025-05-02) || |
| 107 | Chemical engineering | Chemical Reaction
Engineering II | Introduction to
catalysts and
catalysis | UG/PG | 01-05-2025Thursday | Time | 06:21:39 - 07:08:12 (2025-05-02) || |
| 108 | Chemical engineering | Chemical Reaction
Engineering II | Steps in catalytic
reaction:
adsorption,
desorption and
reaction | UG/PG | 01-05-2025Thursday | Time | 07:08:12 - 08:00:00 (2025-05-02) || |
| 109 | Chemical engineering | NOC:Engineering
Thermodynamics | System and its
Surroundings | UG/PG | 02-05-2025Friday | Time | 08:00:00 - 09:00:54 || |
| 110 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2A | UG/PG | 02-05-2025Friday | Time | 09:00:54 - 09:13:50 || |
| 111 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3 | UG/PG | 02-05-2025Friday | Time | 09:13:50 - 09:49:40 || |
| 112 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3A | UG/PG | 02-05-2025Friday | Time | 09:49:40 - 10:01:00 || |
| 113 | Chemical engineering | NOC:Heat transfer | Lecture 3: Energy
Balance | UG/PG | 02-05-2025Friday | Time | 10:01:00 - 10:38:58 || |
| 114 | Chemical engineering | NOC:Heat transfer | Lecture 4: 1D
Steadystate
Conduction -
Resistance Concept | UG/PG | 02-05-2025Friday | Time | 10:38:58 - 11:02:59 || |
| 115 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 02: Atomic
structure and
bonding | UG/PG | 02-05-2025Friday | Time | 11:02:59 - 11:37:07 || |
| 116 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 03: Crystal
systems and
structures: Lattice | UG/PG | 02-05-2025Friday | Time | 11:37:07 - 12:11:23 || |
| 117 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Tutorial: Excel | UG/PG | 02-05-2025Friday | Time | 12:11:23 - 12:28:05 || |
| 118 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Binary Numbers:
Introduction | UG/PG | 02-05-2025Friday | Time | 12:28:05 - 12:33:21 || |
| 119 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point: Real
numbers in decimal
system | UG/PG | 02-05-2025Friday | Time | 12:33:21 - 12:52:41 || |
| 120 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point in
Binary system | UG/PG | 02-05-2025Friday | Time | 12:52:41 - 13:01:02 || |
| 121 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Iterative Method | UG/PG | 02-05-2025Friday | Time | 13:01:02 - 13:18:59 || |
| 122 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional analysis
completed | UG/PG | 02-05-2025Friday | Time | 13:18:59 - 13:46:55 || |
| 123 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Force on a
particle setting in
a fluid | UG/PG | 02-05-2025Friday | Time | 13:46:55 - 14:16:10 || |
| 124 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Modeling | UG/PG | 02-05-2025Friday | Time | 14:16:10 - 14:44:01 || |
| 125 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Control Structures | UG/PG | 02-05-2025Friday | Time | 14:44:01 - 15:04:44 || |
| 126 | Chemical engineering | Chemical Reaction
Engineering II | Derivation of the
rate equation | UG/PG | 02-05-2025Friday | Time | 15:04:44 - 16:00:00 || |
| 127 | Chemical engineering | NOC:Engineering
Thermodynamics | Thermodynamics and
its Applications | UG/PG | 02-05-2025Friday | Time | 16:00:00 - 16:42:48 || |
| 128 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1 | UG/PG | 02-05-2025Friday | Time | 16:42:48 - 17:02:59 || |
| 129 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1A | UG/PG | 02-05-2025Friday | Time | 17:02:59 - 17:28:08 || |
| 130 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2 | UG/PG | 02-05-2025Friday | Time | 17:28:08 - 18:01:12 || |
| 131 | Chemical engineering | NOC:Heat transfer | Lecture 1:
Introduction | UG/PG | 02-05-2025Friday | Time | 18:01:12 - 18:24:40 || |
| 132 | Chemical engineering | NOC:Heat transfer | Lecture 2:
Introduction to
Conduction | UG/PG | 02-05-2025Friday | Time | 18:24:40 - 18:50:24 || |
| 133 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 01:
Introduction | UG/PG | 02-05-2025Friday | Time | 18:50:24 - 19:31:14 || |
| 134 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction -
Computational
Techniques | UG/PG | 02-05-2025Friday | Time | 19:31:14 - 19:48:53 || |
| 135 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 01 -
Numerical methods
for Engineers | UG/PG | 02-05-2025Friday | Time | 19:48:53 - 19:49:54 || |
| 136 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 02 -
Numerical methods
for Engineers | UG/PG | 02-05-2025Friday | Time | 19:49:54 - 19:50:57 || |
| 137 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Overview of Learning
Modules | UG/PG | 02-05-2025Friday | Time | 19:50:57 - 19:59:54 || |
| 138 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Errors and
Approximations | UG/PG | 02-05-2025Friday | Time | 19:59:54 - 20:09:00 || |
| 139 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Course Plan | UG/PG | 02-05-2025Friday | Time | 20:09:00 - 20:14:24 || |
| 140 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Truncation and
Round-Off Errors | UG/PG | 02-05-2025Friday | Time | 20:14:24 - 20:23:44 || |
| 141 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Why we do study
transport processes? | UG/PG | 02-05-2025Friday | Time | 20:23:44 - 20:53:41 || |
| 142 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Transport by
convection and
diffusion | UG/PG | 02-05-2025Friday | Time | 20:53:41 - 21:24:38 || |
| 143 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction | UG/PG | 02-05-2025Friday | Time | 21:24:38 - 21:56:51 || |
| 144 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introductory
Concepts | UG/PG | 02-05-2025Friday | Time | 21:56:51 - 22:21:39 || |
| 145 | Chemical engineering | Chemical Reaction
Engineering II | Introduction to
catalysts and
catalysis | UG/PG | 02-05-2025Friday | Time | 22:21:39 - 23:08:12 || |
| 146 | Chemical engineering | Chemical Reaction
Engineering II | Steps in catalytic
reaction:
adsorption,
desorption and
reaction | UG/PG | 02-05-2025Friday | Time | 23:08:12 - 00:00:00 || |
| 147 | Chemical engineering | NOC:Engineering
Thermodynamics | System and its
Surroundings | UG/PG | 02-05-2025Friday | Time | 00:00:00 - 01:00:54 (2025-05-03) || |
| 148 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2A | UG/PG | 02-05-2025Friday | Time | 01:00:54 - 01:13:50 (2025-05-03) || |
| 149 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3 | UG/PG | 02-05-2025Friday | Time | 01:13:50 - 01:49:40 (2025-05-03) || |
| 150 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3A | UG/PG | 02-05-2025Friday | Time | 01:49:40 - 02:01:00 (2025-05-03) || |
| 151 | Chemical engineering | NOC:Heat transfer | Lecture 3: Energy
Balance | UG/PG | 02-05-2025Friday | Time | 02:01:00 - 02:38:58 (2025-05-03) || |
| 152 | Chemical engineering | NOC:Heat transfer | Lecture 4: 1D
Steadystate
Conduction -
Resistance Concept | UG/PG | 02-05-2025Friday | Time | 02:38:58 - 03:02:59 (2025-05-03) || |
| 153 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 02: Atomic
structure and
bonding | UG/PG | 02-05-2025Friday | Time | 03:02:59 - 03:37:07 (2025-05-03) || |
| 154 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 03: Crystal
systems and
structures: Lattice | UG/PG | 02-05-2025Friday | Time | 03:37:07 - 04:11:23 (2025-05-03) || |
| 155 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Tutorial: Excel | UG/PG | 02-05-2025Friday | Time | 04:11:23 - 04:28:05 (2025-05-03) || |
| 156 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Binary Numbers:
Introduction | UG/PG | 02-05-2025Friday | Time | 04:28:05 - 04:33:21 (2025-05-03) || |
| 157 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point: Real
numbers in decimal
system | UG/PG | 02-05-2025Friday | Time | 04:33:21 - 04:52:41 (2025-05-03) || |
| 158 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point in
Binary system | UG/PG | 02-05-2025Friday | Time | 04:52:41 - 05:01:02 (2025-05-03) || |
| 159 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Iterative Method | UG/PG | 02-05-2025Friday | Time | 05:01:02 - 05:18:59 (2025-05-03) || |
| 160 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional analysis
completed | UG/PG | 02-05-2025Friday | Time | 05:18:59 - 05:46:55 (2025-05-03) || |
| 161 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Force on a
particle setting in
a fluid | UG/PG | 02-05-2025Friday | Time | 05:46:55 - 06:16:10 (2025-05-03) || |
| 162 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Modeling | UG/PG | 02-05-2025Friday | Time | 06:16:10 - 06:44:01 (2025-05-03) || |
| 163 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Control Structures | UG/PG | 02-05-2025Friday | Time | 06:44:01 - 07:04:44 (2025-05-03) || |
| 164 | Chemical engineering | Chemical Reaction
Engineering II | Derivation of the
rate equation | UG/PG | 02-05-2025Friday | Time | 07:04:44 - 08:00:00 (2025-05-03) || |
| 165 | Chemical engineering | NOC:Engineering
Thermodynamics | Property of System | UG/PG | 03-05-2025Saturday | Time | 08:00:00 - 08:44:41 || |
| 166 | Chemical engineering | NOC:Engineering
Thermodynamics | Energy and its
Various Forms | UG/PG | 03-05-2025Saturday | Time | 08:44:41 - 09:34:17 || |
| 167 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4 | UG/PG | 03-05-2025Saturday | Time | 09:34:17 - 09:53:39 || |
| 168 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4A | UG/PG | 03-05-2025Saturday | Time | 09:53:39 - 10:23:59 || |
| 169 | Chemical engineering | NOC:Heat transfer | Lecture 5:
Resistances in
Composite Wall Case | UG/PG | 03-05-2025Saturday | Time | 10:23:59 - 10:44:13 || |
| 170 | Chemical engineering | NOC:Heat transfer | Lecture 6:
Resistances in
Radial Systems | UG/PG | 03-05-2025Saturday | Time | 10:44:13 - 11:13:14 || |
| 171 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 04: X-ray
diffraction: Crystal
structure
determination | UG/PG | 03-05-2025Saturday | Time | 11:13:14 - 11:44:10 || |
| 172 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Direct Method | UG/PG | 03-05-2025Saturday | Time | 11:44:10 - 11:54:36 || |
| 173 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Sequential Method | UG/PG | 03-05-2025Saturday | Time | 11:54:36 - 12:10:33 || |
| 174 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Linear Algebra:
Basics | UG/PG | 03-05-2025Saturday | Time | 12:10:33 - 12:20:54 || |
| 175 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction to
Linear Equations | UG/PG | 03-05-2025Saturday | Time | 12:20:54 - 12:36:21 || |
| 176 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Rank Condition for
Solving Linear
Equations | UG/PG | 03-05-2025Saturday | Time | 12:36:21 - 12:44:44 || |
| 177 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Motivating Gauss
Elimination | UG/PG | 03-05-2025Saturday | Time | 12:44:44 - 13:01:52 || |
| 178 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Heat
transfer in a heat
exchanger | UG/PG | 03-05-2025Saturday | Time | 13:01:52 - 13:32:10 || |
| 179 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: mass
transfer from a
particle suspended
in a fluid completed | UG/PG | 03-05-2025Saturday | Time | 13:32:10 - 14:02:50 || |
| 180 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Process Modelling | UG/PG | 03-05-2025Saturday | Time | 14:02:50 - 14:31:42 || |
| 181 | Chemical engineering | Process Control
Design, Analysis and
Assessment | State Space Modeling | UG/PG | 03-05-2025Saturday | Time | 14:31:42 - 14:57:52 || |
| 182 | Chemical engineering | Chemical Reaction
Engineering II | Derivation of the
rate equation | UG/PG | 03-05-2025Saturday | Time | 14:57:52 - 16:00:00 || |
| 183 | Chemical engineering | NOC:Engineering
Thermodynamics | System and its
Surroundings | UG/PG | 03-05-2025Saturday | Time | 16:00:00 - 17:00:54 || |
| 184 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2A | UG/PG | 03-05-2025Saturday | Time | 17:00:54 - 17:13:50 || |
| 185 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3 | UG/PG | 03-05-2025Saturday | Time | 17:13:50 - 17:49:40 || |
| 186 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3A | UG/PG | 03-05-2025Saturday | Time | 17:49:40 - 18:01:00 || |
| 187 | Chemical engineering | NOC:Heat transfer | Lecture 3: Energy
Balance | UG/PG | 03-05-2025Saturday | Time | 18:01:00 - 18:38:58 || |
| 188 | Chemical engineering | NOC:Heat transfer | Lecture 4: 1D
Steadystate
Conduction -
Resistance Concept | UG/PG | 03-05-2025Saturday | Time | 18:38:58 - 19:02:59 || |
| 189 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 02: Atomic
structure and
bonding | UG/PG | 03-05-2025Saturday | Time | 19:02:59 - 19:37:07 || |
| 190 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 03: Crystal
systems and
structures: Lattice | UG/PG | 03-05-2025Saturday | Time | 19:37:07 - 20:11:23 || |
| 191 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Tutorial: Excel | UG/PG | 03-05-2025Saturday | Time | 20:11:23 - 20:28:05 || |
| 192 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Binary Numbers:
Introduction | UG/PG | 03-05-2025Saturday | Time | 20:28:05 - 20:33:21 || |
| 193 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point: Real
numbers in decimal
system | UG/PG | 03-05-2025Saturday | Time | 20:33:21 - 20:52:41 || |
| 194 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point in
Binary system | UG/PG | 03-05-2025Saturday | Time | 20:52:41 - 21:01:02 || |
| 195 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Iterative Method | UG/PG | 03-05-2025Saturday | Time | 21:01:02 - 21:18:59 || |
| 196 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional analysis
completed | UG/PG | 03-05-2025Saturday | Time | 21:18:59 - 21:46:55 || |
| 197 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Force on a
particle setting in
a fluid | UG/PG | 03-05-2025Saturday | Time | 21:46:55 - 22:16:10 || |
| 198 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Modeling | UG/PG | 03-05-2025Saturday | Time | 22:16:10 - 22:44:01 || |
| 199 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Control Structures | UG/PG | 03-05-2025Saturday | Time | 22:44:01 - 23:04:44 || |
| 200 | Chemical engineering | Chemical Reaction
Engineering II | Derivation of the
rate equation | UG/PG | 03-05-2025Saturday | Time | 23:04:44 - 00:00:00 || |
| 201 | Chemical engineering | NOC:Engineering
Thermodynamics | Thermodynamics and
its Applications | UG/PG | 03-05-2025Saturday | Time | 00:00:00 - 00:42:48 (2025-05-04) || |
| 202 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1 | UG/PG | 03-05-2025Saturday | Time | 00:42:48 - 01:02:59 (2025-05-04) || |
| 203 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 1A | UG/PG | 03-05-2025Saturday | Time | 01:02:59 - 01:28:08 (2025-05-04) || |
| 204 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2 | UG/PG | 03-05-2025Saturday | Time | 01:28:08 - 02:01:12 (2025-05-04) || |
| 205 | Chemical engineering | NOC:Heat transfer | Lecture 1:
Introduction | UG/PG | 03-05-2025Saturday | Time | 02:01:12 - 02:24:40 (2025-05-04) || |
| 206 | Chemical engineering | NOC:Heat transfer | Lecture 2:
Introduction to
Conduction | UG/PG | 03-05-2025Saturday | Time | 02:24:40 - 02:50:24 (2025-05-04) || |
| 207 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 01:
Introduction | UG/PG | 03-05-2025Saturday | Time | 02:50:24 - 03:31:14 (2025-05-04) || |
| 208 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction -
Computational
Techniques | UG/PG | 03-05-2025Saturday | Time | 03:31:14 - 03:48:53 (2025-05-04) || |
| 209 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 01 -
Numerical methods
for Engineers | UG/PG | 03-05-2025Saturday | Time | 03:48:53 - 03:49:54 (2025-05-04) || |
| 210 | Chemical engineering | NOC:Numerical
Methods for
Engineers | TAs Intro 02 -
Numerical methods
for Engineers | UG/PG | 03-05-2025Saturday | Time | 03:49:54 - 03:50:57 (2025-05-04) || |
| 211 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Overview of Learning
Modules | UG/PG | 03-05-2025Saturday | Time | 03:50:57 - 03:59:54 (2025-05-04) || |
| 212 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Errors and
Approximations | UG/PG | 03-05-2025Saturday | Time | 03:59:54 - 04:09:00 (2025-05-04) || |
| 213 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Course Plan | UG/PG | 03-05-2025Saturday | Time | 04:09:00 - 04:14:24 (2025-05-04) || |
| 214 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Truncation and
Round-Off Errors | UG/PG | 03-05-2025Saturday | Time | 04:14:24 - 04:23:44 (2025-05-04) || |
| 215 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Why we do study
transport processes? | UG/PG | 03-05-2025Saturday | Time | 04:23:44 - 04:53:41 (2025-05-04) || |
| 216 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Transport by
convection and
diffusion | UG/PG | 03-05-2025Saturday | Time | 04:53:41 - 05:24:38 (2025-05-04) || |
| 217 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction | UG/PG | 03-05-2025Saturday | Time | 05:24:38 - 05:56:51 (2025-05-04) || |
| 218 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introductory
Concepts | UG/PG | 03-05-2025Saturday | Time | 05:56:51 - 06:21:39 (2025-05-04) || |
| 219 | Chemical engineering | Chemical Reaction
Engineering II | Introduction to
catalysts and
catalysis | UG/PG | 03-05-2025Saturday | Time | 06:21:39 - 07:08:12 (2025-05-04) || |
| 220 | Chemical engineering | Chemical Reaction
Engineering II | Steps in catalytic
reaction:
adsorption,
desorption and
reaction | UG/PG | 03-05-2025Saturday | Time | 07:08:12 - 08:00:00 (2025-05-04) || |
| 221 | Chemical engineering | NOC:Engineering
Thermodynamics | Concepts of
Equilibrium and its
State | UG/PG | 05-05-2025Monday | Time | 08:00:00 - 08:41:52 || |
| 222 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 5 | UG/PG | 05-05-2025Monday | Time | 08:41:52 - 09:24:49 || |
| 223 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE#5A | UG/PG | 05-05-2025Monday | Time | 09:24:49 - 09:37:09 || |
| 224 | Chemical engineering | NOC:Heat transfer | Lecture 7: Heat
Generation I Plane
and Cylindrical Wall | UG/PG | 05-05-2025Monday | Time | 09:37:09 - 09:58:33 || |
| 225 | Chemical engineering | NOC:Heat transfer | Lecture 8: Heat
Generation - II
Problem;
Introduction to
Extended Surfaces | UG/PG | 05-05-2025Monday | Time | 09:58:33 - 10:20:20 || |
| 226 | Chemical engineering | NOC:Heat transfer | Lecture 9: Extended
Surfaces - I General
Formulation | UG/PG | 05-05-2025Monday | Time | 10:20:20 - 10:47:00 || |
| 227 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 05: Crystal
planes and
directions: Indexing | UG/PG | 05-05-2025Monday | Time | 10:47:00 - 11:48:23 || |
| 228 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Gauss Elimination | UG/PG | 05-05-2025Monday | Time | 11:48:23 - 12:16:44 || |
| 229 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Tutorial Recap:
Gauss Elimination | UG/PG | 05-05-2025Monday | Time | 12:16:44 - 12:24:06 || |
| 230 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Back Substitution to
find solution | UG/PG | 05-05-2025Monday | Time | 12:24:06 - 12:32:10 || |
| 231 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Power of
an impeller | UG/PG | 05-05-2025Monday | Time | 12:32:10 - 13:00:35 || |
| 232 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Scalling
up of an impeller | UG/PG | 05-05-2025Monday | Time | 13:00:35 - 13:28:57 || |
| 233 | Chemical engineering | Process Control
Design, Analysis and
Assessment | State Space Solution | UG/PG | 05-05-2025Monday | Time | 13:28:57 - 13:53:19 || |
| 234 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Laplace Transforms -
Part 1 | UG/PG | 05-05-2025Monday | Time | 13:53:19 - 14:15:50 || |
| 235 | Chemical engineering | Chemical Reaction
Engineering II | Heterogenous data
analysis for reactor
design - I | UG/PG | 05-05-2025Monday | Time | 14:15:50 - 15:07:25 || |
| 236 | Chemical engineering | Chemical Reaction
Engineering II | Heterogenous data
analysis for reactor
design - II | UG/PG | 05-05-2025Monday | Time | 15:07:25 - 16:00:00 || |
| 237 | Chemical engineering | NOC:Engineering
Thermodynamics | Property of System | UG/PG | 05-05-2025Monday | Time | 16:00:00 - 16:44:41 || |
| 238 | Chemical engineering | NOC:Engineering
Thermodynamics | Energy and its
Various Forms | UG/PG | 05-05-2025Monday | Time | 16:44:41 - 17:34:17 || |
| 239 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4 | UG/PG | 05-05-2025Monday | Time | 17:34:17 - 17:53:39 || |
| 240 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4A | UG/PG | 05-05-2025Monday | Time | 17:53:39 - 18:23:59 || |
| 241 | Chemical engineering | NOC:Heat transfer | Lecture 5:
Resistances in
Composite Wall Case | UG/PG | 05-05-2025Monday | Time | 18:23:59 - 18:44:13 || |
| 242 | Chemical engineering | NOC:Heat transfer | Lecture 6:
Resistances in
Radial Systems | UG/PG | 05-05-2025Monday | Time | 18:44:13 - 19:13:14 || |
| 243 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 04: X-ray
diffraction: Crystal
structure
determination | UG/PG | 05-05-2025Monday | Time | 19:13:14 - 19:44:10 || |
| 244 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Direct Method | UG/PG | 05-05-2025Monday | Time | 19:44:10 - 19:54:36 || |
| 245 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Sequential Method | UG/PG | 05-05-2025Monday | Time | 19:54:36 - 20:10:33 || |
| 246 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Linear Algebra:
Basics | UG/PG | 05-05-2025Monday | Time | 20:10:33 - 20:20:54 || |
| 247 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction to
Linear Equations | UG/PG | 05-05-2025Monday | Time | 20:20:54 - 20:36:21 || |
| 248 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Rank Condition for
Solving Linear
Equations | UG/PG | 05-05-2025Monday | Time | 20:36:21 - 20:44:44 || |
| 249 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Motivating Gauss
Elimination | UG/PG | 05-05-2025Monday | Time | 20:44:44 - 21:01:52 || |
| 250 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Heat
transfer in a heat
exchanger | UG/PG | 05-05-2025Monday | Time | 21:01:52 - 21:32:10 || |
| 251 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: mass
transfer from a
particle suspended
in a fluid completed | UG/PG | 05-05-2025Monday | Time | 21:32:10 - 22:02:50 || |
| 252 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Process Modelling | UG/PG | 05-05-2025Monday | Time | 22:02:50 - 22:31:42 || |
| 253 | Chemical engineering | Process Control
Design, Analysis and
Assessment | State Space Modeling | UG/PG | 05-05-2025Monday | Time | 22:31:42 - 22:57:52 || |
| 254 | Chemical engineering | Chemical Reaction
Engineering II | Derivation of the
rate equation | UG/PG | 05-05-2025Monday | Time | 22:57:52 - 00:00:00 || |
| 255 | Chemical engineering | NOC:Engineering
Thermodynamics | System and its
Surroundings | UG/PG | 05-05-2025Monday | Time | 00:00:00 - 01:00:54 (2025-05-06) || |
| 256 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 2A | UG/PG | 05-05-2025Monday | Time | 01:00:54 - 01:13:50 (2025-05-06) || |
| 257 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3 | UG/PG | 05-05-2025Monday | Time | 01:13:50 - 01:49:40 (2025-05-06) || |
| 258 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 3A | UG/PG | 05-05-2025Monday | Time | 01:49:40 - 02:01:00 (2025-05-06) || |
| 259 | Chemical engineering | NOC:Heat transfer | Lecture 3: Energy
Balance | UG/PG | 05-05-2025Monday | Time | 02:01:00 - 02:38:58 (2025-05-06) || |
| 260 | Chemical engineering | NOC:Heat transfer | Lecture 4: 1D
Steadystate
Conduction -
Resistance Concept | UG/PG | 05-05-2025Monday | Time | 02:38:58 - 03:02:59 (2025-05-06) || |
| 261 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 02: Atomic
structure and
bonding | UG/PG | 05-05-2025Monday | Time | 03:02:59 - 03:37:07 (2025-05-06) || |
| 262 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 03: Crystal
systems and
structures: Lattice | UG/PG | 05-05-2025Monday | Time | 03:37:07 - 04:11:23 (2025-05-06) || |
| 263 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Tutorial: Excel | UG/PG | 05-05-2025Monday | Time | 04:11:23 - 04:28:05 (2025-05-06) || |
| 264 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Binary Numbers:
Introduction | UG/PG | 05-05-2025Monday | Time | 04:28:05 - 04:33:21 (2025-05-06) || |
| 265 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point: Real
numbers in decimal
system | UG/PG | 05-05-2025Monday | Time | 04:33:21 - 04:52:41 (2025-05-06) || |
| 266 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Floating Point in
Binary system | UG/PG | 05-05-2025Monday | Time | 04:52:41 - 05:01:02 (2025-05-06) || |
| 267 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Iterative Method | UG/PG | 05-05-2025Monday | Time | 05:01:02 - 05:18:59 (2025-05-06) || |
| 268 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional analysis
completed | UG/PG | 05-05-2025Monday | Time | 05:18:59 - 05:46:55 (2025-05-06) || |
| 269 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Force on a
particle setting in
a fluid | UG/PG | 05-05-2025Monday | Time | 05:46:55 - 06:16:10 (2025-05-06) || |
| 270 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Modeling | UG/PG | 05-05-2025Monday | Time | 06:16:10 - 06:44:01 (2025-05-06) || |
| 271 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Introduction to
Control Structures | UG/PG | 05-05-2025Monday | Time | 06:44:01 - 07:04:44 (2025-05-06) || |
| 272 | Chemical engineering | Chemical Reaction
Engineering II | Derivation of the
rate equation | UG/PG | 05-05-2025Monday | Time | 07:04:44 - 08:00:00 (2025-05-06) || |
| 273 | Chemical engineering | NOC:Engineering
Thermodynamics | Energy and its
Interactions | UG/PG | 06-05-2025Tuesday | Time | 08:00:00 - 08:40:46 || |
| 274 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 6 | UG/PG | 06-05-2025Tuesday | Time | 08:40:46 - 09:02:05 || |
| 275 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 6A | UG/PG | 06-05-2025Tuesday | Time | 09:02:05 - 09:26:27 || |
| 276 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 7 | UG/PG | 06-05-2025Tuesday | Time | 09:26:27 - 09:50:43 || |
| 277 | Chemical engineering | NOC:Heat transfer | Lecture 10: Extended
Surfaces II - Fixed
Cross-section Area | UG/PG | 06-05-2025Tuesday | Time | 09:50:43 - 10:18:42 || |
| 278 | Chemical engineering | NOC:Heat transfer | Lecture 11: Extended
Surfaces III -
Varying
Cross-section Area | UG/PG | 06-05-2025Tuesday | Time | 10:18:42 - 10:49:41 || |
| 279 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 06: Optical
microscope | UG/PG | 06-05-2025Tuesday | Time | 10:49:41 - 11:23:02 || |
| 280 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 07: Optical
aberration | UG/PG | 06-05-2025Tuesday | Time | 11:23:02 - 11:44:54 || |
| 281 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Partial Pivoting in
Gauss Elimination | UG/PG | 06-05-2025Tuesday | Time | 11:44:54 - 12:06:17 || |
| 282 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Analysis of Gauss
Elimination | UG/PG | 06-05-2025Tuesday | Time | 12:06:17 - 12:34:18 || |
| 283 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Convection
and diffusion | UG/PG | 06-05-2025Tuesday | Time | 12:34:18 - 13:02:13 || |
| 284 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Phsical
interpretation of
dimensionless groups
completed | UG/PG | 06-05-2025Tuesday | Time | 13:02:13 - 13:31:11 || |
| 285 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Laplace Transforms -
Part 2 | UG/PG | 06-05-2025Tuesday | Time | 13:31:11 - 14:00:17 || |
| 286 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Analysis of transfer
function models -
Part 1 | UG/PG | 06-05-2025Tuesday | Time | 14:00:17 - 14:32:26 || |
| 287 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Analysis of transfer
function models -
Part 2 | UG/PG | 06-05-2025Tuesday | Time | 14:32:26 - 14:54:27 || |
| 288 | Chemical engineering | Chemical Reaction
Engineering II | Catalyst
deactivation and
accounting for it in
design – I | UG/PG | 06-05-2025Tuesday | Time | 14:54:27 - 16:00:00 || |
| 289 | Chemical engineering | NOC:Engineering
Thermodynamics | Concepts of
Equilibrium and its
State | UG/PG | 06-05-2025Tuesday | Time | 16:00:00 - 16:41:52 || |
| 290 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 5 | UG/PG | 06-05-2025Tuesday | Time | 16:41:52 - 17:24:49 || |
| 291 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE#5A | UG/PG | 06-05-2025Tuesday | Time | 17:24:49 - 17:37:09 || |
| 292 | Chemical engineering | NOC:Heat transfer | Lecture 7: Heat
Generation I Plane
and Cylindrical Wall | UG/PG | 06-05-2025Tuesday | Time | 17:37:09 - 17:58:33 || |
| 293 | Chemical engineering | NOC:Heat transfer | Lecture 8: Heat
Generation - II
Problem;
Introduction to
Extended Surfaces | UG/PG | 06-05-2025Tuesday | Time | 17:58:33 - 18:20:20 || |
| 294 | Chemical engineering | NOC:Heat transfer | Lecture 9: Extended
Surfaces - I General
Formulation | UG/PG | 06-05-2025Tuesday | Time | 18:20:20 - 18:47:00 || |
| 295 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 05: Crystal
planes and
directions: Indexing | UG/PG | 06-05-2025Tuesday | Time | 18:47:00 - 19:48:23 || |
| 296 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Gauss Elimination | UG/PG | 06-05-2025Tuesday | Time | 19:48:23 - 20:16:44 || |
| 297 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Tutorial Recap:
Gauss Elimination | UG/PG | 06-05-2025Tuesday | Time | 20:16:44 - 20:24:06 || |
| 298 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Back Substitution to
find solution | UG/PG | 06-05-2025Tuesday | Time | 20:24:06 - 20:32:10 || |
| 299 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Power of
an impeller | UG/PG | 06-05-2025Tuesday | Time | 20:32:10 - 21:00:35 || |
| 300 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Scalling
up of an impeller | UG/PG | 06-05-2025Tuesday | Time | 21:00:35 - 21:28:57 || |
| 301 | Chemical engineering | Process Control
Design, Analysis and
Assessment | State Space Solution | UG/PG | 06-05-2025Tuesday | Time | 21:28:57 - 21:53:19 || |
| 302 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Laplace Transforms -
Part 1 | UG/PG | 06-05-2025Tuesday | Time | 21:53:19 - 22:15:50 || |
| 303 | Chemical engineering | Chemical Reaction
Engineering II | Heterogenous data
analysis for reactor
design - I | UG/PG | 06-05-2025Tuesday | Time | 22:15:50 - 23:07:25 || |
| 304 | Chemical engineering | Chemical Reaction
Engineering II | Heterogenous data
analysis for reactor
design - II | UG/PG | 06-05-2025Tuesday | Time | 23:07:25 - 00:00:00 || |
| 305 | Chemical engineering | NOC:Engineering
Thermodynamics | Property of System | UG/PG | 06-05-2025Tuesday | Time | 00:00:00 - 00:44:41 (2025-05-07) || |
| 306 | Chemical engineering | NOC:Engineering
Thermodynamics | Energy and its
Various Forms | UG/PG | 06-05-2025Tuesday | Time | 00:44:41 - 01:34:17 (2025-05-07) || |
| 307 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4 | UG/PG | 06-05-2025Tuesday | Time | 01:34:17 - 01:53:39 (2025-05-07) || |
| 308 | Chemical engineering | NOC:Fluid Mechanics
and Its Applications | LECTURE 4A | UG/PG | 06-05-2025Tuesday | Time | 01:53:39 - 02:23:59 (2025-05-07) || |
| 309 | Chemical engineering | NOC:Heat transfer | Lecture 5:
Resistances in
Composite Wall Case | UG/PG | 06-05-2025Tuesday | Time | 02:23:59 - 02:44:13 (2025-05-07) || |
| 310 | Chemical engineering | NOC:Heat transfer | Lecture 6:
Resistances in
Radial Systems | UG/PG | 06-05-2025Tuesday | Time | 02:44:13 - 03:13:14 (2025-05-07) || |
| 311 | Chemical engineering | NOC:Material Science
and Engineering | Lecture 04: X-ray
diffraction: Crystal
structure
determination | UG/PG | 06-05-2025Tuesday | Time | 03:13:14 - 03:44:10 (2025-05-07) || |
| 312 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Direct Method | UG/PG | 06-05-2025Tuesday | Time | 03:44:10 - 03:54:36 (2025-05-07) || |
| 313 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Sequential Method | UG/PG | 06-05-2025Tuesday | Time | 03:54:36 - 04:10:33 (2025-05-07) || |
| 314 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Linear Algebra:
Basics | UG/PG | 06-05-2025Tuesday | Time | 04:10:33 - 04:20:54 (2025-05-07) || |
| 315 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Introduction to
Linear Equations | UG/PG | 06-05-2025Tuesday | Time | 04:20:54 - 04:36:21 (2025-05-07) || |
| 316 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Rank Condition for
Solving Linear
Equations | UG/PG | 06-05-2025Tuesday | Time | 04:36:21 - 04:44:44 (2025-05-07) || |
| 317 | Chemical engineering | NOC:Numerical
Methods for
Engineers | Motivating Gauss
Elimination | UG/PG | 06-05-2025Tuesday | Time | 04:44:44 - 05:01:52 (2025-05-07) || |
| 318 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: Heat
transfer in a heat
exchanger | UG/PG | 06-05-2025Tuesday | Time | 05:01:52 - 05:32:10 (2025-05-07) || |
| 319 | Chemical engineering | NOC:Transport
Processes I: Heat
and Mass Transfer | Dimensional
analysis: mass
transfer from a
particle suspended
in a fluid completed | UG/PG | 06-05-2025Tuesday | Time | 05:32:10 - 06:02:50 (2025-05-07) || |
| 320 | Chemical engineering | Process Control
Design, Analysis and
Assessment | Process Modelling | UG/PG | 06-05-2025Tuesday | Time | 06:02:50 - 06:31:42 (2025-05-07) || |
| 321 | Chemical engineering | Process Control
Design, Analysis and
Assessment | State Space Modeling | UG/PG | 06-05-2025Tuesday | Time | 06:31:42 - 06:57:52 (2025-05-07) || |
| 322 | Chemical engineering | Chemical Reaction
Engineering II | Derivation of the
rate equation | UG/PG | 06-05-2025Tuesday | Time | 06:57:52 - 08:00:00 (2025-05-07) || |
